Nitecore® TINI 2 USB-C Rechargeable Light

• 500 lumens, runtime up to 60 hours
• 5 brightness levels, 2 operating modes
• Real-time OLED display
• Built-in, long-lasting Li-ion USB-C rechargeable battery
• Charge in the wild or on the go with a power bank battery
• Ultralight – 0.64 oz (18.2 g)

Nitecore® TINI 2 is a dual-LED USB-C rechargeable light with five brightness levels up to 500 lumens and a runtime of 60 hours on ultralow. This thumb-size marvel is ultralight at just 0.64 oz (18.2 g). TINI 2 has a total reflective optic lens providing 90˚ flood illumination for outstanding night vision and a rugged, hard-anodized aluminum body. Just plug into a power bank battery to recharge and never worry about running out of power or replacing batteries again.

A multifunctional, real-time OLED display successively shows brightness level, operating mode, remaining runtime, and battery level/voltage, totally simplifying operation. No more guessing, no need to remember what those flashes mean.

TINI 2 has two buttons, Power and Mode – so simple. Short press the Power button to turn the light on. When the display is off, short press the Mode button to activate the screen. Press the Mode button to cycle from Ultralow>Low>Mid>High>Ultralow. To turn off, short press the Power button again. TINI 2 has a memory and will turn on in the last previous mode. To enter Ultralow directly when the light is off, long press the Power button. To enter Turbo mode directly, hold down the Mode button, then release to resume to the prior mode.

TINI 2 has two different operating modes. In the default Demo Mode, the light shuts off automatically after 30 sec without operation (excluding reactivating the display). A 30 sec countdown is displayed. This works well for tasks that only require light for a short period time. It also prevents power loss when the light is accidentally activated or left on. If you need continuous illumination, use Daily Mode. Holding down both the Power and Mode buttons at the same time will switch between the two modes. A single flash indicates Demo Mode, a double flash indicates Daily Mode and the display indicates the current mode. If the light shuts off in Demo Mode after 30 seconds, you can switch to Daily Mode by pressing the Power button within 3 seconds. An Advanced Temperature Regulation module regulates the output based on the ambient environment, maintaining optimal performance.

TINI 2 has two lockout modes. In Half Lockout Mode (Lockout 1), the Power button is deactivated but the Mode button still operates for accessing Turbo. In Full Lockout Mode (Lockout 2), both the Power and Mode buttons are deactivated. To prevent the light from accidentally turning on while in your pocket or pack, use Full Lockout Mode (Lockout 2). 

TINI 2 has a built-in, long lasting 280 mAh Li-ion rechargeable battery that’s much more sustainable than disposable batteries. An intelligent protective charging circuit and a USB-C connection make it easy to recharge. Since you probably already carry a spare battery to charge your phone, there’s no need to worry about running out of power or replacing batteries, just plug into a power bank, wall charger, computer, or car (charging cable NOT provided). The light maintains full functionality while charging. The charging port has a rubber cover to provide protection from dust and moisture.

A special power management chip allows the charge to last up to 1 year. To see how much battery power is left, with the light turned off, short press the Mode button. The battery level and voltage will display. When the battery voltage falls below 3.4 V, the buttons flash blue indicating the battery needs to be recharged. Plug it in and a charging indicator and battery level are displayed to let you know when the charge is complete. 

TINI 2 has an integrated, stainless mounting ring. So strong it supports up to 66 lb (30 kg) of weight. A clip and split ring are also included for mounting a lanyard, connecting a micro carabiner, or attaching to a keychain.

Specifications

LED: 2x OSRAM P8 LEDs

LED Color Temperature: 5700-6300K, Cool White

Battery: Built-in rechargeable Li-ion, 280 mAh

Lighting Modes: Ultralow/Low/Mid/High/Turbo

Beam Pattern: 90˚ flood

Body: Aluminum, hard anodized

Display: OLED

Switch: Side Power and Mode buttons

Charging Connection: USB-C (charging cable NOT provided)

Charging Time: 1 hr 45 min, approximate

Dimensions (LxWxH): 1.83 x 0.98 x 0.49 in. (42.3 x 25 x 12.5 mm)

Lanyard Hole (Dia): ø0.11 in. (2.8 mm)

Weight

   Light: 0.64 oz (18.2 g) with built-in battery

   Carabiner Clip with Split Ring: 0.09 oz (2.6 g)

Impact Resistance: 3.3 ft (1 m)

Ingress Protection (IP) Rating: IP54, dust protection (limited ingress) and water spray resistant

Included

   1x Light with integrated USB-C rechargeable Li-ion battery

   1x Carabiner Clip, 0.2 in. (5 mm) opening, with split ring, ø0.40 in. (10.1 mm) ID

User Manual

Nitecore TINI 2 User Manual

• Very bright light, to avoid eye injuries, DO NOT stare directly into the light and DO NOT shine the light directly into the eyes of others.
• Keep away from children to avoid injury.
• DO NOT use if battery is damaged to avoid fire or explosion.
• Charge in or on a fire-proof surface to avoid possible injury. DO NOT charge unattended.
• Charge only at temperatures between 32-113°F (0-45°C) to avoid permanent damage and possible fire or explosion during charging.
• Recycle or dispose of properly according to local regulations at end of life, DO NOT dispose in fire or incinerator as battery may catch fire and explode.

In no event shall Litesmith, LLC be liable for any direct, indirect, punitive, incidental, or special consequential damages, to property or life, whatsoever arising out of or connected with the use or misuse of its products.